-
www.JackHammers.com
Your most reliable source for top quality pneumatic tools, parts, service and experience
1-800-241-9669 matwinc@gmail.com
Search suggestions - click me!
Search term suggestions:×
- Check spelling (we don't use spellcheck)
- Use tool type, brand, model, part number, etc.
- Avoid filler words (a, the, for, verbs, etc.)
- Call us if you have a question (see Contact page)
- Example: "Airrex 400 paving breaker"
CP
Model: 1210
Paving Breaker
This tool is lightweight, fast and very hard hitting. It is most often used on jobs where weight restrictions are in place such as ramps, bridge decks and some highway jobs.
"S" Models are equipped with mufflers.
"SVR" Models are equipped with mufflers and vibration reduction handles.
| Model | Chuck / Shank Size (inches) | Part Number |
| 1210 | 1" x 4-1/4" | 8900003001 |
| Model | Chuck / Shank Size (inches) | Part Number |
| 1210S | 1" x 4-1/4" | 8900003003 |
| 1210S | 1-1/4" x 6" | 8900003009 |
| 1210S | 1-1/8" x 6" | 8900003007 |
| Model | Chuck / Shank Size (inches) | Part Number |
| 1210SVR | 1" x 4-1/4" | 8900003005 |
| 1210SVR | 1-1/4" x 6" | 8900003010 |
| 1210SVR | 1-1/8" x 6" | 8900003008 |
| Part Number | Description | Weight | Length | Air consumption | Blows per minute | Vibration level 3-axes (ISO 20643) | Chuck size |
| lb | inch | cfm | m/sec2 | inch | |||
| 8900003001 | CP 1210 | 44,0 | 21 | 56,2 | 1400 (23,33/s) | --- | 1 x 4-1/4 |
| 8900003003 | CP 1210 S | 48,0 | 21 | 56,2 | 1400 (23,33/s) | 14,6 | 1 x 4-1/4 |
| 8900003009 | CP 1210 S | 50,0 | 23 | 56,2 | 1400 (23,33/s) | 14,6 | 1-1/4 x 6 |
| 8900003007 | CP 1210 S | 50,0 | 23 | 56,2 | 1400 (23,33/s) | 14,6 | 1-1/8 x 6 |
| 8900003005 | CP 1210 SVR | 54,0 | 24 | 56,2 | 1400 (23,33/s) | 5,3 | 1 x 4-1/4 |
| 8900003010 | CP 1210 SVR | 55,0 | 26 | 56,2 | 1400 (23,33/s) | 5,3 | 1-1/4 x 6 |
| 8900003008 | CP 1210 SVR | 56,2 | 26 | 56,5 | 1400 (23,33/s) | 5,3 | 1-1/8 x 6 |
| Paving Breaker & Clay Digger Bits | |||||
| Longer Lengths Available for Most Tools - Call: 800‐241‐9669 | |||||
| Tool: | Under Collar Length (inch): | Details: |  Part Number: |
 Part Number: |
 Part Number: |
 Asphalt Cutter |
11" | 5" Wide Blade | 100-AC | 118-AC | 125-AC |
 Bushing Tool |
8" | 16 Teeth | 100-BT | 118-BT | 125-BT |
 Clay Spade |
16" | 5-1/2" Wide Blade | 100-CS | 118-CS | 125-CS |
 Digging Chisel |
16" | 3" Wide Blade | 100-DC | 118-DC | 125-DC |
 Pin Driver |
8" | Socket: 3/8" Deep x 1-3/4" Dia. |
100-SD | 118-SD | 125-SD |
 Frost Wedge |
17" | 2" Wide Blade | 100-FW | 118-FW | 125-FW |
 Ground Rod Driver |
SOCKET DIAMETER: 11/16" | 100-GRD(A) | 118-GRD(A) | 125-GRD(A) | |
| 13/16" | 100-GRD(B) | 118-GRD(B) | 125-GRD(B) | ||
| 1" | 100-GRD(C) | 118-GRD(C) | 125-GRD(C) | ||
| 1-1/8" | 100-GRD(D) | 118-GRD(D) | 125-GRD(D) | ||
 Moil Point |
14" | LONGER LENGTHS AVAILABLE | 100P-14 | 118P-14 | 125P-14 |
| 18" | 100P-18 | 118P-18 | 125P-18 | ||
 Narrow Chisel |
14" | LONGER LENGTHS AVAILABLE | 100C-14 | 118C-14 | 125C-14 |
| 18" | 100C-18 | 118C-18 | 125C-18 | ||
 Wide Chisel |
14" | LONGER LENGTHS AVAILABLE | 100C3-14 | 118C3-14 | 125C3-14 |
| 18" | 100C3-18 | 118C3-18 | 125C3-18 | ||
 Pipe Driver |
11" | PIPE SIZE: 1" |
100-PD(A) | 118-PD(A) | 125-PD(A) |
| 1-1/4" | 100-PD(B) | 118-PD(B) | 125-PD(B) | ||
| 1-1/2" | 100-PD(C) | 118-PD(C) | 125-PD(C) | ||
| 2" | 100-PD(D) | 118-PD(D) | 125-PD(D) | ||
 Rock Buster |
13" | Taper Range: 1-1/4" to 2-1/4" Dia |
100-RB | 118-RB | 125-RB |
 Splitting Wedge |
17-1/2" | Drill Hole Size 2 x 12" Deep | 100-SW | 118-SW | 125-SW |
 Detachable Shank |
7-3/4" | FOR USE WITH: TAMPER PAD TENT STAKE DRIVER SHEATHING DRIVER |
100-DS | 118-DS | 125-DS |
 Tamping Pad |
6" SQUARE | TPS-6 | |||
| 8" SQUARE | TPS-8 | ||||
| 7" ROUND | TPR-7 | ||||
 Tent Stake Driver |
2" | TSD-200 | |||
| 2-1/2" | TSD-250 | ||||
 Sheathing Driver |
2" | TSH-200 | |||
| 3" | TSH-300 | ||||
1210 Safety Manual
Brands
